Touchscreens get the headlines, but walk through a factory floor or a fuel station forecourt and you will notice what operators actually trust: a bright, oversized digit you can read from ten metres away, in sunlight, at an angle, without a boot sequence. That is the job the 2.3 inch single digit 7 segment LED display was built for — a 2.3 inch character height inside a compact 47.8 × 69.7 × 12 mm module.
🔵 Model in focus: 2.3 inch single digit 7 segment LED display — 47.8 × 69.7 × 12 mm module, 20mA driving current, available in red, green, blue, yellow and white, storage range −30°C to +80°C, RoHS and Reach compliant, 100 pcs per bag.
Bench scales, crane scales and truck weighbridges all need one thing: a number readable by the operator and the customer standing three metres away. The 2.3 inch module drops straight into a standard cast-aluminium housing with no backlight driver at all.
Forecourt signage is a brutal environment — rain, diesel vapour and sunlight, with prices changing twice a day. Single digit 2.3 inch modules stack side by side and are swapped one digit at a time.
Banks, clinics and service counters show a two or three digit call number to a whole waiting room. Large digits reduce "was that my number?" confusion and cut perceived waiting time.
Score and countdown boards live or die on refresh clarity. LED segments switch in microseconds, so the clock never smears the way a slow LCD does.
Lift lobbies and currency displays in bank halls use the same logic: one number, enormous, visible across a lobby. Wide storage range −30°C to +80°C covers unheated lift shafts and tropical branch offices alike.
Remaining-space counters above each aisle and lane numbers at toll booths need digits that drivers read at 20 km/h in the rain — exactly the case where oversized segments beat any graphical panel.
Digital readouts on machine panels, calibration rigs and utility meters favour a digit an operator can log from a distance while wearing gloves.
| Format | Digit height | Best reading distance |
|---|---|---|
| 2.3 inch single digit | 2.3 in (58 mm class) | 8–12 m — forecourts, scoreboards, weighing |
| 0.56 inch 4 digit | 0.56 in | 1–3 m — appliances, meters, instruments |
| Dot matrix / 16 segment | Variable | Text, symbols and scrolling messages |
A 2.3 inch digit hides a real engineering problem: at that segment length, brightness uniformity and epoxy sealing decide whether the display survives a humid forecourt for five years. Dongguan Lanjin Optoelectronics Co., Ltd., manufacturing in Dongguan since 2005, builds this single digit 7 segment module as part of a wider LED digital display, SMD LED, through-hole LED and PCBA range, backed by ISO 9001:2015 quality management, EU RoHS compliance and 18 years of OEM/ODM work for instrument and appliance makers.
Standard deliveries run 1,000 pcs minimum per model, 100 pcs per bag, 7–15 days lead time, with common anode or common cathode wiring and pin-out customised to the customer’s existing PCB — the usual reason a replacement supplier gets approved without redesigning the housing.
Q: Can you match my current PCB pin configuration?
Yes, pin-out and common anode or common cathode layout can be customised to the existing board.
Q: Which colours are available?
Red, green, blue, yellow and white as standard, with custom wavelength requests reviewed per project.
Q: Is a sample possible before the tooling decision?
Yes, samples are offered for evaluation before mass production, with a short sample lead time.
Design tip: when stacking 2.3 inch digits into a price board, keep 8–10 mm between modules and fit a dark bezel — contrast lifts perceived brightness by about a third at the same 20mA.
ผู้ติดต่อ: Miss. Ava Huang
โทร: +86 18819512052
แฟกซ์: 86-0769-89616935
Thai
